Mechanical Engineer

Seattle, WA
Full Time
Engineering
Experienced

Organization

ZeroAvia is a leader in zero-emission aviation, flying the world's largest hydrogen-electric aircraft since September 2020. Its focus is the design and commercialization of hydrogen-powered aviation solutions to address a variety of markets, initially targeting short-haul, sub-regional commercial flights up to 500 miles. To date, ZeroAvia has secured the UK CAA and FAA experimental permit to fly for its 6 seat aircraft powered by hydrogen-electric powertrain, passed significant flight tests and is on track for commercial deliveries by 2023. Its achievements to date were rewarded by the UK prime minister by inviting ZeroAvia as a member of the UK Jet Zero Council. 

ZeroAvia’s powertrain development focuses on integrating hydrogen storage tanks, fuel cell systems, and electric motors, delivering a solution that will be not only without carbon emissions but also cheaper to operate. Commercializing the solution requires the establishment of a new clean aviation ecosystem, encompassing hydrogen production from renewable energy sources and tackling public perception of safety.

Responsibilities

  • Ownership of CAD design and data
  • Support the design team on CAD environment, processes and best practices
  • Create 3D CAD models of complex parts and assemblies
  • Perform simulation and analysis as required
  • Prepare production drawings conforming to all applicable regulatory standards
  • Apply knowledge of materials, finishes and manufacturing processes to drawings
  • Participate in design reviews
  • Work closely with engineers and manufacturing personnel to ensure that all aspects of the design are understood
  • Serve as liaison with operations during manufacture of parts to ensure that all design issues are resolved and drawings are updated
  • Technically direct work and check drawings of lower level drafters
  • Provide expertise in CAD software for specific problem solving on a project
  • Daily availability to include evenings and weekends when necessary to reach goals/deadlines

Experience and qualifications

  • Expert user in SolidWorks
  • Experience with Teamcenter PLM or similar
  • Experience with SolidWorks simulation
  • Experience in the creation of complex aerospace 3D CAD and mechanical engineering drawings
  • Knowledge of materials, finishes, and other processes including additive manufacturing
  • Commensurate depth of related aerospace industry experience
  • Have the ability to assimilate technology and technical details quickly and communicate the requirements clearly to ZeroAvia colleagues and stakeholders
  • Excellent interpersonal skills and level of spoken and written English, additional languages a plus
  • Ability to work on own initiative as well as part of a growing multinational team

Diversity and inclusion

ZeroAvia is an equal opportunity employer and as a young company in the aviation industry, we value diversity and need people of different backgrounds that bring a plethora of skills, perspectives, and mindsets to the table that can spur originality, imagination, and creativity. We do not discriminate based on race, religion, colour, national origin, sex, gender expression, sexual orientation, age, marital status, veteran status or disability status.

 

Share

Apply for this position

Required*
Apply with
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 5/31/2023
Why are you being asked to complete this form?

We are a federal contractor or subcontractor required by law to provide equal employment opportunity to qualified people with disabilities. We are also required to measure our progress toward having at least 7% of our workforce be individuals with disabilities. To do this, we must ask applicants and employees if they have a disability or have ever had a disability. Because a person may become disabled at any time, we ask all of our employees to update their information at least every five years.

Identifying yourself as an individual with a disability is voluntary, and we hope that you will choose to do so. Your answer will be maintained confidentially and not be seen by selecting officials or anyone else involved in making personnel decisions. Completing the form will not negatively impact you in any way, regardless of whether you have self-identified in the past. For more information about this form or the equal employment obligations of federal contractors under Section 503 of the Rehabilitation Act, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

You are considered to have a disability if you have a physical or mental impairment or medical condition that substantially limits a major life activity, or if you have a history or record of such an impairment or medical condition. Disabilities include, but are not limited to:

  • Autism
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, or HIV/AIDS
  • Blind or low vision
  • Cancer
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or hard of hearing
  • Depression or anxiety
  • Diabetes
  • Epilepsy
  • Gastrointestinal disorders, for example, Crohn's Disease, or irritable bowel syndrome
  • Intellectual disability
  • Missing limbs or partially missing limbs
  • Nervous system condition for example, migraine headaches, Parkinson's disease, or Multiple sclerosis (MS)
  • Psychiatric condition, for example, bipolar disorder, schizophrenia, PTSD, or major depression
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date